Safety pallet gate type SG3A - lifting at an angle

On a narrow platform, it is sometimes impossible to pick up loads from the rear. This is where the SG3A lifting gate type comes in: the pallet is brought in by forklift or hoist and placed on the work platform. With this model, the second mobile guardrail is not opposite the one that closes the edge of the void, but it is at 90° to the front guardrail. The pallet can be removed laterally on one side of the pallet gate.

In this way, a safety lock gate can be installed even in particularly narrow areas such as corridors or shallow platforms with side exits.

Our SG3 safety gates are made in France and certified by APAVE.

Safety pallet gate type SG3 - lifting with angle

The rear guardrail rises at an angle of 90° to the front one

With the SG3A type safety gate, loads are absorbed laterally

The loads are inside the pallet lock gate

Pallet gate type SG3A view from below